Name the material
Water, glycerin, liquid metal, mineral salt. The material sets the viscosity, and viscosity is what the eye reads as real.
Describe a physical event and watch it played back in slow motion, from a dye plume to a growing crystal.
Generate Video








Prompt Guide
Model
Reference Image
Container, material and what starts the event: 'a glass tank of still water, one drop of blue dye released at the surface'. Two lines are enough.
Say what changes and how slowly: 'the plume sinks and folds at about five times slower than real time'. Avoid 'physics happening'.
Macro or wide, side light on a dark background. One light source shows the shape of the plume; two flatten it.
Five seconds covers a drop or a swing. A full sequence is three or four clips cut together in an editor.
Ten setups across fluids, materials, motion and light. Open one to read the prompt, then change the material or the speed.
A drop of black ink released into a glass of clear water, blooming into threads, backlit against white, macro lens, camera locked off, slow motion, 16:9, no text.
Try This StyleTwo liquids of different density in a tall glass, the boundary wobbling as one is poured slowly, side light, macro lens, 16:9, no text.
Try This StyleAir bubbles rising in a column of thick oil, wobbling as they climb, backlit, dark background, camera locked off, 16:9, no text.
Try This StyleFrost crystals spreading across a dark window pane from one corner, branching patterns, cold blue light, macro lens, 16:9, no text.
Try This StyleA thin sheet of metal heated from one edge until it glows and sags, colour shifting from grey to orange, dark workshop, 16:9, no text.
Try This StyleDry sand pouring into a narrow glass column, grains piling into a cone, side light, macro lens, 16:9, no text.
Try This StyleA long line of dominoes falling one after another across a wooden floor, camera tracking alongside at the wave front, warm light, 16:9, no text.
Try This StyleFive steel pendulums on a frame, the first released, momentum passing to the last, side light on black, camera locked off, 16:9, no text.
Try This StyleA narrow beam of white light entering a glass prism and splitting into a spectrum on a dark wall, dust in the beam, camera locked off, 16:9, no text.
Try This StyleSunlight passing through rippling water onto a white pool floor, bright caustic patterns shifting, overhead camera, 16:9, no text.
Try This StyleWater, glycerin, liquid metal, mineral salt. The material sets the viscosity, and viscosity is what the eye reads as real.
Write 'slow motion, roughly five times slower' instead of 'slow'. Without a scale, the model picks a speed at random.
A locked frame lets the event carry the shot. Moving cameras hide the moment the motion stops making sense.
A drop and its splash is two beats. Render the drop, then the splash, and cut them together.
Dark background for clear fluids, bright background for smoke. The event disappears when the background has the same tone.
This is generated video, not a solver. Do not take timings or trajectories from it for a lab report.
I needed a dye plume for a science channel intro. The first clip moved like smoke, so I specified 'still water, no current, one drop' and the second took had the slow fold I wanted. I would not use it for data, only for the visual.
The pendulum render looked right until the middle baton started swinging on its own. Locking the camera and rendering five seconds instead of ten kept the pass clean.
I tried to show a full crystal growth in one clip and got a time-lapse blur. Splitting it into three five-second stages was the only way the structure stayed readable.
No. The model generates plausible motion from your description. It is useful for illustration and b-roll, not for measurement, prediction or a lab report.
Name the speed, keep the camera locked and light the subject from the side. Fast cuts and moving cameras are what make a render look like a sped-up clip instead.
The model is inventing the next moment. Shorter clips, one event per render and a fixed camera keep the shape stable.
Yes. Upload the diagram as the first frame and describe only the change you want, such as a wave passing or an arrow extending. Keep the movement small so the labels survive.
Five seconds for one event, ten only when the event has a clear beginning and end. Most sequences are several short clips cut together.